Communication

A robot must be able to communicate, either between its components, with other robots or remote computers. This category gathers all communication modules for your robot: standard radio protocols such as Xbee, Bluetooth, Wifi, standard wired communication module (USB, FTDI, RS232, CAN ...).

Filter By

Active filters

Have you plans to create a project incorporating the NFC or RFID technology? Then you’ll probably find this NFC/RFID module, based on the PN352 chip, extremely useful. The chip is already found in lots of mainstream devices using near field communication, or NFC.

In Stock

This USB to serial adapter will enable communication between your computer and your microcontroller.

In Stock

A great little module for RFID fans, the RFID USB Reader will open up new possibilities for RFID-compatible scanners. Including the ability to download the information stored on an RFID card by USB!

In Stock

You’re going to need an RFID reader if you want to start working on non-contact ID projects, and the ID-20LA module by ID Innovations is an extremely simple one to use. Perfect for beginners!

In Stock

Programmer for microcontrollers based on AVR technology. This programmer has been specificaly designed to program 3pi and m3pi robots from Pololu.

In Stock

This SparkFun XBee Explorer USB Board includes a FT231X converter for programming your XBee module directly from your computer.

In Stock

The MIFARE SM130 RFID Module by SparkFun is a 28-pin DIP module that provides easy access to the 13.56 MHz RFID technology on Arduino.

In Stock

This small module could well revolutionise the world of the IoT, and change the lives of its fans. The ESP8266 WiFi module has its own TCP/IP protocol for direct WiFi access, plus it has its own 32-bit processor!

In Stock

The WRL-11713 WiFi Dongle is the most efficient solution for equipping your pcDuino with a WiFi connection. And, even better, it also works with Raspberry Pi and BeagleBone Black!

In Stock

With this RFID Evaluation Shield you can connect the SM130 RFID module to your Arduino without any painful welding. Things are always simpler with XBee!

In Stock

This mini-USB to serial FTDI module can be installed on your 3.3V Arduino boards without a USB connector and will equip your Arduino with the very clever auto-reset function!

In Stock

XBee technology is very popular. XBee is basically a point to point RF communication technology that is easy, cheap and with a low consumption. XBee is well adapted for embedded projects (Internet of Things, home automation) and robotics.

In Stock